ZITARES NCS NCS140-70FX-20/220-240 Art. no.: 10120160 Status: serie

  • Non-dimmable 1-channel ECG for constant current operation of LED modules
  • Non-SELV topology: high output voltages for the flexible series connection of LED modules along with...
  • CE.png
  • 1101.png
  • ENEC 10.png
  • LEDset_Logo.png

Product information

  • Non-dimmable 1-channel ECG for constant current operation of LED modules
  • Non-SELV topology: high output voltages for the flexible series connection of LED modules along with high efficency
  • Highest possible flexibility thanks to adjustable output currents in a wide range via LEDset
  • Maximum energy efficiency of up to 93 % at maximum output load
  • Lowest ripple of output current in high- and low-frequency ranges for flicker- and glimmer-free light
  • Suitable for direct current operation and application in combination with central battery installations
  • ECG extensively protected against abnormal operating conditions at the output, e.g. short-circuit, open circuit or overload
  • Certified as thermally protected ECG
  • Conformance with international regulations, regarding safety and operation, electromagnetic compatibility and immunity to interference
  • Nominal service lifetime with a failure rate ≤ 10 %:
    50,000 h at tc = tc,max

Technical data

Mains voltage supply

Rated voltage range 220 ... 240 [V]
Rated frequency 0 / 50 ... 60 [Hz]

Battery operation

Voltage range for continuous operation 198 ... 278 [V]

Behaviour at mains overvoltage

Overvoltage protection 350 V (2 h)
Switch-off of the lamp(s) at ca. 320 VAC

Starting time

Starting time 0.5 s

Total harmonic disortion

Total harmonic distortion (max.) 10 %, at 100 % load

Power factor

Power factor 0.98

Output data

Number of channels 1
Max. total admissible power 70 W

Temperatures

Ambient temperature ta -25 ... 50 °C
Max. admissible case temperature tc,max 75 °C

Efficiency

ECG efficiency
At 100 % load
93

Degree of protection

ECG case IP 20

Connection terminals

Wire cross section 0.5 ... 1.5 mm²
Wire stripping length 8 ... 9 mm
Type 90°-Plug-in terminal with release hole
Length (X) 280 mm
Width (Y) 30 mm
Height (Z) 21 mm
Hole spacing (XM) 270 mm
Hole spacing (ZM) 9 mm
Net Weight 0.22 kg

Downloads

  • Datasheet
  • 3D Drawing
  • CE Declaration
  • ENEC Certificate

Contact

Hotline

+49 2932 9000 9800

Questions? Help?
Sales contacts
Our locations
Newsletter
12