ZITARES CCS CCS250-50QS-01/220-240 Art. no.: 10098196 Status: phase-out

  • ENEC 10.png
  • EMC VDE.png
  • CE.png
  • 1101.png
  • SELV_equiv.png

Product information

  • Non-dimmable 2-channel ECG for constant current operation of LED modules
  • SELV equiv. output voltage ≤ 60 VDC for simplified luminaire construction
  • Extended range of applications by means of separated output load per channel
  • Maximum energy efficiency of up to 91 % at maximum output load
  • Lowest ripple of output current in high- and low-frequency ranges for flicker- and glimmer-free light
  • Suitable for direct current operation and application in combination with central battery installations
  • ECG extensively protected against abnormal operating conditions at the output, e.g. short-circuit, open circuit or overload
  • Certified as thermally protected ECG
  • Conformance with international regulations, regarding safety and operation, electromagnetic compatibility and immunity to interference
  • Nominal service lifetime with a failure rate ≤ 10 %:
    50,000 h at tc = tc,max

Technical data

Mains voltage supply

Rated voltage range 220 ... 240 [V]
Rated frequency 0 / 50 ... 60 [Hz]

Battery operation

Max. admissible voltage range (continuous) 198 ... 278 [VDC]

Behaviour at mains overvoltage

Overvoltage protection 350 VAC (2 h)
Switch-off of the lamp(s) at ca. 320 VAC

Starting time

Starting time 0.5 s

Total harmonic disortion

Total harmonic distortion (max.) 10 %, at 100 % load

Power factor

Power factor 0.98

Output data

Number of channels 2
Max. total admissible power 50 W

Temperatures

Ambient temperature ta -25 ... 50 °C
Max. admissible case temperature tc,max 75 °C

Degree of protection

ECG case IP 20

Connection terminals

Type 45° push-in terminal with key
Wire cross section 0.5 ... 1.5 mm²
Wire stripping length 7.5 ... 8.5 mm
ECG efficiency
At 100 % load
90
Length (X): 135 mm
Width (Y): 75 mm
Height (Z): 21 mm
Hole spacing (XM): 124 mm
Hole spacing (YM): 64 mm
Net Weight: 0.25 kg

Downloads

  • Datasheet
  • 3D Drawing
  • ENEC Certificate
  • EC Declaration
  • EMC Certificate

Contact

Hotline

+49 2932 9000 9800

Questions? Help?
Sales contacts
Our locations
Newsletter
12